Vanasche Motorsports

Premium fuel tank filter by TwinAir, custom-made for the VANASCHE Billet Tank Cap (available separately, see below) and suitable for the below-mentioned Husqvarna and KTM models. This filter prevents any dirt particles from entering the tank during refueling. Simply insert it into the fuel tank before fastening it by the fuel filler base. It does not interfere with the OEM fuel O-Ring that keeps fuel from leaking if the bike is tipped over.  Note: Regarding a few models, KTM has installed tanks with smaller filler necks covering all years of manufacture. In these cases, the petrol filter with a diameter of 39 mm is required. Please measure beforehand!  Suitable for: Husqvarna 701 Enduro + SM (all) KTM 690 - 2008-2018 KTM 690 - from MY 2019 Also suitable for the OEM tanks of the following models: KTM 690 Enduro/SMC  (all) Husqvarna 701 Enduro/SM - from MY 2016 KTM 1050 Adventure (all) KTM 1090 Adventure (all) KTM 1190 Adventure (all) KTM 1290 Super Adventure (all) KTM 1290 Super Duke R/GT - from MY 2017 Manufacturer TWIN AIR B.V.Eisenhowerweg 8 5466 AC Veghel, The NetherlandsHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage

High-quality, oversized billet foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the Aprilia Tuareg 660 model (all years). Specifications Precision-made of heavy duty, high-quality 7075 billet aluminum 1/2" (1.2 cm) lower than the original foot pegs Tread area size: 2-3/8" x 3-7/8" (60 mm x 98 mm) - depth x width Surface equipped with several screwed pins for maximum grip and braking sensationDelivered as pair (left + right) Available in black Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality, oversized billet foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the below-mentioned KTM and Husqvarna models. Available in 3 different colours - for further information, please see below. Specifications Precision-made of heavy duty, high-quality 7075 billet aluminum 3/4" (2 cm) lower than the original foot pegs 5/16" (0,8 cm) rearward compared to the original position Tread area size: 2-3/8" x 3-7/8" (60 mm x 98 mm) - depth x width Surface equipped with several screwed pins for maximum grip and braking sensation Colour: Black, blue and orange anodised (please select from above) Suitable for: Husqvarna 701                         all Husqvarna 901 Norden           all KTM 690                                   all KTM 790                                   all KTM 890                                   all KTM 1050/1090/1190/1290      all GasGas 700 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality, oversized billet foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the Yamaha Tenere 700 model (all model years). Available in 2 different colours - for further information, please see below. Specifications Precision-made of heavy duty, high-quality 7075 billet aluminum 1/2" (1.2 cm) lower than the original foot pegs Tread area size: 2-3/8" x 3-7/8" (60 mm x 98 mm) - depth x width Surface equipped with several screwed pins for maximum grip and braking sensationDelivered as pair (left & right) Colour: Black and blue anodised (please select from above) Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality GPS mount by the US manufacturer VANASCHE, custom-made for the Husqvarna 901 Norden model. Delivery Includes the AMPS pattern in BOTH orientations (portrait and landscape). The product has also been slightly adjusted, so that no spacer kits are necessary to mount the larger GPS units. Specifications CNC-machined from a solid piece of 6061 alloy aluminum Hands down the most rigid setup that mounts directly to the Husqvarna factory GPS location Includes AMPS bolt pattern (40 x 30 mm) to securely mount GPS units The mount holds the GPS at the same viewing angle as the factory TFT display which provides a perfect position whether sitting or standing A small machined pocket allows wiring to pass through the GPS mount base into the headlight assembly for easy termination to the pre-wired accessory power Available in anodised blue Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality GPS adapter by the US manufacturer VANASCHE MOTORSPORTS, fitting the Husqvarna 901 Norden. The goal with this redesign was simple; to create a gps mount with angular adjustment that would not slip or rotate in the harshest conditions. The solution is a unique cogged tooth arm that engages a pocketed base platform for a rock solid fit that absolutely will NOT rotate in the hardest of impacts. Simple thumb knob allows loosening of the arm which can than be disengaged from the cogged pocket, rotated to a new viewing angle, and re-tightened. The teeth and cogs are aligned in a manner that allows adjustments in 10-degree increments both at the base and at the upper device holder. The lower joint is fixed with a hex head screw and ideally is used only for 'setup' while the upper joint can be changed via thumb knob. While infinite adjust-ability is a nice feature our experience has led us to realize it is not suitable for the hard hits we take in off-road situations. Features: CNC machined from solid billet aluminum extrusionsCeramic Bead Blasted and Anodized black for corrosion resistance AMPS bolt pattern in both Portrait and Landscape orientation (30mmx38mm) All holes in both orientations of the AMPS are threaded for M4x0.7 screws Includes x4 stainless M4 screws for device attachment Over 180-degrees of Rotatable viewing angle in 10-Degree Increments at BOTH Joints Thumb Knob can be positioned on Left or Right side Fits: Husqvarna 901 Norden Note: DOES NOT fit KTM - ModelsManufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality GPS mount* by the US manufacturer VANASCHE, suitable for the below-mentioned KTM models. *Product update: Includes the AMPS pattern in BOTH orientations (portrait and landscape). The product has also been slightly adjusted, so no spacer kits are necessary any more to mount the larger GPS units. Specifications CNC-machined from a solid piece of 6061 alloy aluminum Hands down the most rigid setup that mounts directly to the KTM factory GPS location Includes AMPS bolt pattern (40 x 30mm) to securely mount GPS units The mount holds the GPS at the same viewing angle as the factory TFT display which provides a perfect position whether sitting or standing The adjustable windscreen of the KTM 790 can be mounted in both low and high positions without GPS interference A small machined pocket allows wiring to pass through the GPS mount base into the headlight assembly for easy termination to the pre-wired accessory power Available in anodised black and orange - please select from above Suitable for: KTM 390 Adventure KTM 790 Adventure KTM 790 Adventure R KTM 790 Adventure R Rally KTM 890 Adventure                2021-2022 KTM 890 Adventure L             2021-2022 KTM 890 Adventure R Rally    2021-2022 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality GPS adapter by the US manufacturer VANASCHE MOTORSPORTS, fitting the KTM models listed below. The KTM 890 Adventure R/S/Rally from MY 2023 has received a facelift, so VANASCHE has developed a new device holder to hold any GPS devices, mobile phones etc. to be placed directly above the TFT display. The mount offers various features, amongst others a rotating viewing angle and a vertical adjustment, in order to put the device in the best possible location. Made from machined aluminum and hand-welded stainless steel, this product offers a much stronger quality than the plastic versions. Also included are two pairs of cable connectors to further facilitate connecting the device to the ACC power supply. The AMPS matrix can be used both horizontally and vertically. Specifications Material: High-strength 6061 aviation aluminum CNC-machined from solid billet aluminum extrusions and black anodized for corrosion resistance TIG-welded stainless steel bracket, black powder-coated All holes in both orientations of the AMPS are threaded for M4x0.7 screws Includes 4 stainless M4 screws for device attachment 90 degree rotating viewing angle 3/4" vertical adjustment 2 pairs of cable pigtails included Quick adjustability - Choose from 2 options:- Cam locking levers (cam levers made in Germany)- Thumb buttonThe locking function (cam lever or thumb button) can be located on the right or left side of the device.Cam lever vs. thumb button: - The cam lever features a stronger lock for more aggressive off-road use and is easier to access and adjust with gloves.- The thumb button is less expensive, smaller (more hidden), but harder to reach with gloves or large hands. Fits: KTM 890 Adventure S, Adventure R, Adventure Rally R – 2023-2024 model years ONLY KTM 790 - model year 2024 ONLY Note: DOES NOT fit KTM 790 2019-2020! DOES NOT fit KTM 390! DOES NOT fit DUKE models! DOES NOT fit Husqvarna Norden 901!  <iframe width="800" height="450" src="https://www.youtube.com/embed/hWxvfdEwoVI" title="2023 890 GPS Mount Overview Installation and Useage" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe> Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality GPS adapter by the US manufacturer VANASCHE MOTORSPORTS, fitting the KTM models listed below. The goal with this redesign was simple; to create a gps mount with angular adjustment that would not slip or rotate in the harshest conditions. The solution is a unique cogged tooth arm that engages a pocketed base platform for a rock solid fit that absolutely will NOT rotate in the hardest of impacts. Simple thumb knob allows loosening of the arm which can than be disengaged from the cogged pocket, rotated to a new viewing angle, and re-tightened. The teeth and cogs are aligned in a manner that allows adjustments in 10-degree increments both at the base and at the upper device holder. The lower joint is fixed with a hex head screw and ideally is used only for 'setup' while the upper joint can be changed via thumb knob. While infinite adjust-ability is a nice feature our experience has led us to realize it is not suitable for the hard hits we take in off-road situations. Features: CNC machined from solid billet aluminum extrusionsCeramic Bead Blasted and Anodized black for corrosion resistance AMPS bolt pattern in both Portrait and Landscape orientation (30mmx38mm) All holes in both orientations of the AMPS are threaded for M4x0.7 screws Includes x4 stainless M4 screws for device attachment Over 180-degrees of Rotatable viewing angle in 10-Degree Increments at BOTH Joints Thumb Knob can be positioned on Left or Right side Fits: KTM 890 Adventure S, Adventure R, Adventure Rally R – 2023-2025 model years ONLY KTM 790 - 2024-2025 model years ONLY Note: DOES NOT fit KTM 790 2019-2020!DOES NOT fit KTM 890 2021-2022! DOES NOT fit KTM 390! DOES NOT fit DUKE models! DOES NOT fit Husqvarna Norden 901!Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key The original Husqvarna sealing ring is used for installation Delivery includes all the necessary mounting material Available in blue anodised Suitable for: Husqvarna 701 Enduro / SM (all) Husqvarna 701 LR "Long Range" (fits both front and rear tanks) GasGas ES/SM 700 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned KTM model. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key The original Husqvarna sealing ring is used for installation Delivery includes all the necessary mounting material Available in orange and black anodised - please select from above Suitable for: KTM 690 Enduro from MY 2019 NOTE: From MY 2021, the seat release has been relocated to an unfavorable position within the tank cap. In order not to have to completely unscrew the VANASCHE MOTORSPORTS tank cap every time to remove the seat, we recommend to use a cable tie to move the seat release under the rear fender (as shown in the last picture above). Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality billet tank cap by the US manufacturer VANASCHE, custom-made for the KTM 790/890 R/S/Rally models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications 100% made in the USA CNC machined from a solid piece of high-strength, aircraft grade aluminum 33% Lighter weight than OEM assembly (400g vs 600g) Provides for an easy filling of the tank without using the ignition key Filler hole is inline with fuel tank hole - properly offset like no other design on the market. No abrupt lips or edges inside filler hole to cause splashing or back spatter of fuel No counterbored holes to collect dirt Venting from side port to allow mounting of a tank bag without constricting tank breathing Delivery includes all the necessary mounting material, as well as a new Viton O-ring which is also necessary for the installation Available in black anodised Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned KTM models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key This unit retains the stock venting location. The original HUSQVARNA sealing ring is used for installation Delivery includes all the necessary mounting material Available in orange and black anodised - please select from above Suitable for: KTM 690 Enduro  2008-18 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality case saver billet by the US manufacturer VANASCHE, suitable for the below-mentioned models. Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Providing optimum protection for the engine case and clutch slave cylinder Cut out to offer a view to the front sprocket condition and access to clean/remove debris (unlike the stock cover) Delivery includes the original KTM hardware and a KTM chain slider Also compatible with the Oberon, Rekluse and Sigutech slave cylinders Maximum front sprocket size: 16 teeth Available in black, blue and orange - please select from above Suitable for: KTM 690 Enduro / SMC (all) Husqvarna 701 Enduro / SM (all) GasGas 700 Enduro + SMC Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality case saver billet by the US manufacturer VANASCHE, suitable for the below-mentioned KTM- and Husqvarna-models. Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Providing optimum protection for the engine case and clutch slave cylinder Cut out to offer a view to the front sprocket condition and access to clean/remove debris (unlike the stock cover) Delivery includes mounting hardware, a sensor cover and a chain slider Also compatible with the Rekluse and Sigutech slave cylinders Maximum front sprocket size: 16 teeth Available in black, blue and orange - please select from above Suitable for: KTM 790 Adventure S KTM 790 Adventure R KTM 790 Duke KTM 890 Adventure L KTM 890 Adventure R KTM 890 Duke Husqvarna 901 Norden NOTE: Does NOT fit with TUSK skid plates! Does NOT fit with SW-MOTECH crash bars! Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality, oversized and lowered foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the below-mentioned models. Specifications TIG-welded of heavy duty, high-quality stainless steel Skeletal design for shedding of mud/debris Heavy  duty machined clevis for added strength and perfect fitment 1.0" (25 mm) lower than the original foot pegs Tread area size: 2-3/8" x 3-3/4"  (60 mm x 90 mm) - depth x width Internal stiffener and low profile underside gussets to maintain ground clearance and exceptional strength 3 taller outer teeth to reduce side slip (taller by 2mm) Includes new pair of cotter pins (factory springs are reused) Fits: Husqvarna 701                           all Husqvarna 901                           all KTM 690                                     all KTM 790/890                             all KTM 1050/1090/1190/1290        all GasGas 700 Enduro + SMC.     all Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear brake lever by the US manufacturer VANASCHE, suitable for the below-mentioned KTM and Husqvarna models. Specifications Precision-made of heavy duty billet aluminum Including sealed bearings pressed in place Installation with the OEM mounting hardware Factory pedal pad can be reused Available separately: Custom-made pedal pad by VANASCHE (see below) Lever available in silver and black - please select from above Suitable for: KTM 690 Enduro / Supermoto (2011-2017) Husqvarna 701 Enduro / Supermoto (2016-2019) Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear brake lever by the US manufacturer VANASCHE, suitable for the KTM 690 Enduro from MY 2019 and Husqvarna 701 Enduro + Supermoto from MY 2020 NEW: All brake pedals have been reshaped to increase strength and the levers for newer bikes equipped with quickshift no longer require the additional sensor cover replacement.  Specifications Precision-made of heavy duty billet aluminum Including sealed bearings pressed in place Installation with the OEM mounting hardware Factory pedal pad can be reused Available separately: Custom-made pedal pad by VANASCHE (see below) Lever available in silver and black - please select from above Suitable for: KTM 690 Enduro and Supermoto from MY 2019 Husqvarna 701 Enduro + Supermoto from MY 2020 GasGas ES/SM 700 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear brake lever by the US manufacturer VANASCHE, suitable for the below-mentioned KTM models. Specifications Precision-made of heavy duty billet aluminum Including sealed bearings pressed in place A significantly larger cross-section over the factory for more strength and less flex felt Material increase to eliminate the weak point of the OEM-lever regarding the pedal stop bolt Installation with the OEM mounting hardware Factory pedal pad can be reused Available separately: Custom-made pedal pad by VANASCHE (see below) Lever available in silver and black - please select from above Suitable for: KTM 790 Adventure KTM 790 Adventure R KTM 890 Adventure KTM 890 Adventure R KTM 890 Adventure R Rally Husqvarna 901 Norden Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

Rear brake pedal pad by the US manufacturer VANASCHE, custom-made for the below-mentioned KTM and Husqvarna models. Available in 3 different versions - for further information, please see below. Specifications Precision-made of heavy duty, high-quality billet aluminum Surface equipped with several pressed dowel pins (PI) or screwed pins (SS) for maximum grip and braking sensation Colour: Black, blue and orange anodised (please select from above) Available in the following versions - please select as requested: PP1 - Similar in size and height to the stock lever; mountable to both the original and the VANASCHE brake levers PP2 - Underside mounted pedal pad, slightly oversized from stock and providing an ~3/8" (1 cm) drop. Designed to be mounted to the VANASCHE levers, but with a small amount of filing it will also work with original ones PP3 - Stepped pedal pad offering two different braking heights for sitting and standing. The upper platform level is about the same height as the stock lever, the lower platform is dropped by about 1/2" (1.3 cm). Designed to be mounted to the VANASCHE levers, but with a small amount of filing it will also work with original ones PP4 - Oversized pad, simply offering a larger surface area over the stock pedal pad. This pad has two mounting positions, i. e. further forward or rearward Suitable for: KTM 690 Enduro + Supermoto (2011-2017) KTM 690 Enduro + Supermoto 2019+ Husqvarna 701 Enduro + Supermoto from MY 2016 Husqvarna 901 Norden GasGas 700 Enduro + SMC Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear disc guard by the US manufacturer VANASCHE, suitable for the below-mentioned models. Specifications Machined in one piece from a 1.25" thick, highly robust aluminum plate Successfully tested under the toughest conditions 100% resistant against fractures and deformation Available in the following colours - please select from above: Silver (NOT anodised) Black anodised Blue anodised Suitable for: KTM 690 E/R  all MY ​Husqvarna 701  all MY GasGas 700 Enduro + SMC In order to add some protection to the dangling ABS wire, we recommend the use of a corresponding cable guide by MOTOMINDED (available separately, see below). Note: Any earlier KTM 690 models without the ABS function do not need the a. m. cable guide! Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear disc guard by the US manufacturer VANASCHE, suitable for the below-mentioned KTM and Husqvarna models. Specifications Made in the USA Machined in one piece from a 1.5" (3.8 cm) thick, highly robust aluminum plate Successfully tested under the toughest conditions 100% resistant against fractures and deformation Corresponding MOTOMINDED ABS Cable Guide available separately Available in the following colours - please select from above: Black anodised Orange anodised Blue anodised Fits:  KTM 790/890 Adventure S/R/Rally Husqvarna 901 Norden Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear disc guard by the US manufacturer VANASCHE, suitable for the below-mentioned KTM, Husaberg and Husqvarna models. Specifications Made in the USA Machined in one piece from a 1.25" thick, highly robust aluminum plate Successfully tested under the toughest conditions 100% resistant against fractures and deformation Available in the following colours and 2 different fittings (see below) - please select from above: Black anodised Orange anodised  20mm axle fits:  Husaberg 125-570                                                      2009-2014 Husqvarna FE/TE 125-501                                          2014-2023  Husqvarna FC/TC 125-450                                         2014-2015 KTM 125-530 EXC/EXC-F/SX/SX-F                            2004-2012 KTM 125-450 XC-W, XCF-W, EXC, EXC-F, 6 Days    2013-2023 25mm axle fits:  Husqvarna FC/TC/FX/TX 125-450                             2016-2022 KTM 125-450 SX,SXF,EXC,EXC-F                              2013-2022 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

Premium shift lever by VANASCHE MOTORSPORTS made of high-quality anodized black billet aluminium featuring a coloured stainless steel folding tip, custom-made for the below-mentioned KTM and Husqvarna models. Specifications Made in the USA Extremely robust and durable Highly resistant and precisely fitting 2 mounting positions - factory and extra low position Shifter can be lowered signifancly further than the OEM lever (up to 1/2" = about 2.5 cm),  helping accommodate ergonomics with lowered footpegs Including sealed precision Japanese deep groove ball bearings Significantly larger cross-section over the factory unit, improving both strength from impacts as well as rigidity to remove the flex felt in the factory pedal Bolt-on 1/4" (6 mm) long stainless steel shift tip extension included (see image no. 6 above) for those that would like  a longer shifting tip. Just remove it if you prefer the factory length!  Available in black with a folding tip in 3 different colours - please select from above Fits: KTM 790/890 Adventure R/S/RALLY from MY 2019 Husqvarna 901 Norden Adventure & Expedition - all Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor