Prices incl. VAT plus shipping costs
Immediately available for delivery, delivery time approx. 1-3 working days - NOTE: Different delays apply to deliveries abroad!
(Due to the Covid-19 pandemic, there may be some delays in individual cases. Therefore, the specified duration cannot be guaranteed)
- Order number: KWEHL
- Shipping Weight 0.23 kg
Haul loop by KRIEGA made of tough synthetic material, fitting the front fork of dirt bikes.
Front fork straps are an essential equipment for extreme enduro events. KRIEGA's unique design is a self-supporting/semi-rigid solution, which is always easy to find and use.
- Abrasion-resistant reinforcement made of Hypalon®
- TOUGHTEK - grips wet or dry
- Stainless steel buckles
- 10-year guarantee - learn more
There are 2 methods of fitting the front Haul Loop. Both use 2 x heavy-duty cable ties:
Undo web on the stainless buckles. Wrap the web around the fork leg, directly under the lower triple-clamp. Re-thread the stainless buckles (making sure to feed the web back through the buckle to 'lock' it off). The loose end can be placed under the elastic-loop provided.
To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in either 2 ways. The first method is to feed the cable tie through the small web-loop next to the stainless buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp. Another method is to use 2 x cable ties linked together in a figure of eight behind the front light/number plastic. The figure of eight method is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length/s of the cable ties. The shorter the tie the more elevated the Haul Loop will sit.